Forge Motorsport Brake Cooling Duct Kit bodies use 2mm thick sheet aluminum, the brackets are 3mm thick sheet aluminum, and the tubing is 2mm thick 2” diameter aluminum tubing with a bead rolled end for secure mounting of the ducting. The entire assembly is lightly polished.
The ducts are designed to bolt directly to the wheel hub using the OEM caliper carrier mounting points and the supplied hardware.
The ducts have been designed to allow for optimal clearance from the axle boot, the caliper itself, and all other working and non-working suspension and braking components. They also allow for a full range of steering input without any clearance issues.
(This product is only designed to work with the OEM Brembo calipers. We cannot guarantee fitment with any other brake caliper upgrades or downgrades(non-Brembo Evo RS). This product will also work with aftermarket rotors, so long as the OEM Brembo calipers are still used.)
Included Components
- Brake Caliper Alloy Diffusers
- Fitting Hardware
- Roughly 6 feet ( 2 × 1 Metres)of 2” (51mm) ducting
- Clamps and zip-ties to secure ducting
- Basic Instructions
Weights
- Each duct weighs exactly 1/3 of a pound (2/3 for both)
- The entire set of hardware for both front calipers weighs just under 1 pound.
- The Ducting weighs approx 2 pounds (shipping weight will differ)